Novita Nordic Wool: Juurakko cardigan
The criss-crossing cables of the Juurakko cardigan are reminiscent of tree roots. Knitted from Novita Nordic Wool.
Designer
Sari Nordlund
Size(s)
XS/S(M)L(XL)XXL
Finished dimensions
body circumference 94(102)110(118)126 cm / 37(40¼)43¼(46½)49½ in
length 98(100)102(104)106 cm / 38½(39¼)40¼(41)41¾ in
inner sleeve length 50(51)51(52)52 cm / 19¾(20)20(20½)20½ in
Yarn demand
Novita Nordic Wool (649) Squirrel 950(1000)1050(1150)1200 g
Needles and other supplies
Circular needles (80 cm / 32 in) Novita 4½ mm (UK 7 / US 7) and 5 mm (UK 6 / US 8) or sizes needed; a second 4½ mm circular needle (80 cm / 32 in) for the border; cable needle
Finished dimensions
body circumference 94(102)110(118)126 cm / 37(40¼)43¼(46½)49½ in
length 98(100)102(104)106 cm / 38½(39¼)40¼(41)41¾ in
inner sleeve length 50(51)51(52)52 cm / 19¾(20)20(20½)20½ in
Stitch patterns Ribbing: *k1, p1*, repeat *–*. On the wrong side rows, knit the knit sts and purl the purl sts. Double seed stitch and cable pattern: follow the chart and instructions. Garter stitch: knit all rows.
Gauge 20 sts and 25 rows in double seed st with larger needles or approx. 27 sts in cable pattern with larger needles (steamed) = 10 cm / 4 in
Back
Using the smaller needles cast on 142(150)158(166)174 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart I work in double seed st and cable pattern as follows: repeat section A 6(8)10(12)14 times [= 12(16)20(24)28 sts], work section B (= 35 sts), section C (= 48 sts), section D (= 35 sts), repeat section E 6(8)10(12)14 times [= 12(16)20(24)28 sts]. At sections A, B, D and E work rows 2-16 and then keep repeating rows 1-16. At section C work rows 2-48 and then keep repeating rows 1-48.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at both ends: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decreases every 7,5 cm 7 more times = 126(134)142(150)158 sts.
When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at both ends for the armholes = 96(102)106(112)118 sts.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at both ends. Securely bind off the remaining 42(42)46(46)46 sts.
Left front
Using the smaller needles cast on 73(77)81(85)89 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart II work in double seed st and cable pattern as follows: work the 1 st at the right end of the chart, repeat section A 6(8)10(12)14 times [= 12(16)20(24)28 sts], work section B (= 34 sts) and section C (= 26 sts). At sections A and B work rows 2-16 and then keep repeating rows 1-16. At section C work rows 2-48 and then keep repeating rows 1-48.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at the right end: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decrease every 7,5 cm 7 more times = 65(69)73(77)81 sts.
When the piece measures 70(71)72(74)75 cm, begin neckline decreases on the next RS row: work to last 3 sts, k2tog, p1. Repeat the decrease 16(14)17(17)16 more times on every other row and 6(8)7(7)8 times every 4th row.
Note: When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at the right end for the armhole.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at the right end.
Right front
Using the smaller needles cast on 73(77)81(85)89 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart II work in double seed st and cable pattern as follows: work section C (= 26 sts), section D (= 34 sts), repeat section E 6(8)10(12)14 times [= 12(16)20(24)28 sts], work the 1 st at the left end of the chart. At section C work rows 2-48 and then keep repeating rows 1-48. At sections D and E work rows 2-16 and then keep repeating rows 1-16.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at the left end: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decrease every 7,5 cm 7 more times = 65(69)73(77)81 sts.
When the piece measures 70(71)72(74)75 cm, begin neckline decreases on the next RS row: p1, skp (= slip 1 knitwise, k1, pass slipped st over), work to end. Repeat the decrease 16(14)17(17)16 more times on every other row and then 6(8)7(7)8 times every 4th row.
Note: When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at the left end for the armhole.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at the left end for the shoulder.
Sleeves
Using the smaller needles cast on 71(73)73(75)75 sts and work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart I work in double seed st and cable pattern as follows: work 0(1)1(0)0 st at the right end of the chart, repeat section A 9(9)9(10)10 times [= 18(18)18(20)20 sts], work section B (= 35 sts), repeat section E 9(9)9(10)10 times [= 18(18)18(20)20 sts], work the 0(1)1(0)0 at the left end. Work rows 2-16 of the chart, then keep repeating rows 1-16.
When the piece measures 17(16)15(16)17 cm, increase 1 st at both ends. Repeat the increases every 5,5(5)4(4,5)3,5 cm 5(6)8(7)9 more times = 83(87)91(91)95 sts. Work the increased sts in double seed st.
When the piece measures 50(51)51(52)52 cm, on every other row bind off 1x5(6)6(7)7 sts, 0(1)1(1)1x4 sts, 2(1)1(1)1x3 sts, 2x2 sts, 12(12)13(13)14x1 st, 1x2 sts and 1x4 sts at both ends. Bind off the remaining sts.
Knit the other sleeve in the same manner, but instead of section B work section D of chart I.
Finishing
Pin to measurements wrong side up, mist and allow to dry. Sew the shoulder seams and side seams.
Border: Using the smaller needles pick up and knit sts from the RS of the work. Starting at the bottom edge of the right front pick up 3 sts for every 4 rows, place marker at the starting point of the neckline slanting, continue up to the shoulder seam, pick up 41(41)43(43)43 sts from the back neckline, continue to the starting point of the neckline slanting, place marker, continue along the left front edge. Make sure the number of sts is divisible by 2 + 1 st.
Begin ribbing: (WS) p2, k1, *p1, k1*, repeat *-*, p2.
After 2 rows in ribbing, begin short rows: (WS) work ribbing to last st before second marker. Turn work, yarn over. Work to last st before first marker. Turn work, yarn over. *Work to last 6 sts before next yo, turn work and yarn over*, repeat *-* until there are 9 yarn overs on both sides.
On the next row work ribbing to end. At the same time knit or purl the yarn overs together with the sts after them: k2tog if the next st is a knit st and p2tog if a purl st.
Work ribbing for 3 rows. On the first row work the remaining yarn overs together with the sts after them: skp if the next st is a knit st and ssp if it is a purl st (= slip 2 sts knitwise one by one from left-hand needle to right-hand needle, move both sts back to left-hand needle and purl them together through the back loop).
Repeat the short rows. After that, work ribbing, working the yarn overs together with the sts before them on the first two rows as established.
When the border measures 7 cm from the bottom, bind off in pattern.
Attach the sleeves. Sew the sleeve seams.
Finishing
Pin to measurements wrong side up, mist and allow to dry.
Belt: Using the smaller needles cast on 12 sts and work garter stitch for 160(160)170(170)170 cm. Bind off.
Finished dimensions
body circumference 94(102)110(118)126 cm / 37(40¼)43¼(46½)49½ in
length 98(100)102(104)106 cm / 38½(39¼)40¼(41)41¾ in
inner sleeve length 50(51)51(52)52 cm / 19¾(20)20(20½)20½ in
Stitch patterns Ribbing: *k1, p1*, repeat *–*. On the wrong side rows, knit the knit sts and purl the purl sts. Double seed stitch and cable pattern: follow the chart and instructions. Garter stitch: knit all rows.
Gauge 20 sts and 25 rows in double seed st with larger needles or approx. 27 sts in cable pattern with larger needles (steamed) = 10 cm / 4 in
Back
Using the smaller needles cast on 142(150)158(166)174 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart I work in double seed st and cable pattern as follows: repeat section A 6(8)10(12)14 times [= 12(16)20(24)28 sts], work section B (= 35 sts), section C (= 48 sts), section D (= 35 sts), repeat section E 6(8)10(12)14 times [= 12(16)20(24)28 sts]. At sections A, B, D and E work rows 2-16 and then keep repeating rows 1-16. At section C work rows 2-48 and then keep repeating rows 1-48.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at both ends: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decreases every 7,5 cm 7 more times = 126(134)142(150)158 sts.
When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at both ends for the armholes = 96(102)106(112)118 sts.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at both ends. Securely bind off the remaining 42(42)46(46)46 sts.
Left front
Using the smaller needles cast on 73(77)81(85)89 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart II work in double seed st and cable pattern as follows: work the 1 st at the right end of the chart, repeat section A 6(8)10(12)14 times [= 12(16)20(24)28 sts], work section B (= 34 sts) and section C (= 26 sts). At sections A and B work rows 2-16 and then keep repeating rows 1-16. At section C work rows 2-48 and then keep repeating rows 1-48.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at the right end: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decrease every 7,5 cm 7 more times = 65(69)73(77)81 sts.
When the piece measures 70(71)72(74)75 cm, begin neckline decreases on the next RS row: work to last 3 sts, k2tog, p1. Repeat the decrease 16(14)17(17)16 more times on every other row and 6(8)7(7)8 times every 4th row.
Note: When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at the right end for the armhole.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at the right end.
Right front
Using the smaller needles cast on 73(77)81(85)89 sts and begin ribbing on the WS with k1. Work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart II work in double seed st and cable pattern as follows: work section C (= 26 sts), section D (= 34 sts), repeat section E 6(8)10(12)14 times [= 12(16)20(24)28 sts], work the 1 st at the left end of the chart. At section C work rows 2-48 and then keep repeating rows 1-48. At sections D and E work rows 2-16 and then keep repeating rows 1-16.
When the piece measures 20(21)21(22)22 cm, decrease 1 st at the left end: k2tog or p2tog as needed to maintain double seed st pattern. Repeat the decrease every 7,5 cm 7 more times = 65(69)73(77)81 sts.
When the piece measures 70(71)72(74)75 cm, begin neckline decreases on the next RS row: p1, skp (= slip 1 knitwise, k1, pass slipped st over), work to end. Repeat the decrease 16(14)17(17)16 more times on every other row and then 6(8)7(7)8 times every 4th row.
Note: When the piece measures 75(76)77(79)80 cm, on every other row bind off 1x5(6)6(7)7 sts, 1x3 sts, 2(2)3(3)3x2 sts and 3(3)3(3)4x1 st at the left end for the armhole.
When the armhole measures 20(21)22(22)23 cm, on every other row bind off 3x9(10)10(11)12 sts at the left end for the shoulder.
Sleeves
Using the smaller needles cast on 71(73)73(75)75 sts and work ribbing for 12 cm.
Switch to the larger needles. Starting on row 1 of chart I work in double seed st and cable pattern as follows: work 0(1)1(0)0 st at the right end of the chart, repeat section A 9(9)9(10)10 times [= 18(18)18(20)20 sts], work section B (= 35 sts), repeat section E 9(9)9(10)10 times [= 18(18)18(20)20 sts], work the 0(1)1(0)0 at the left end. Work rows 2-16 of the chart, then keep repeating rows 1-16.
When the piece measures 17(16)15(16)17 cm, increase 1 st at both ends. Repeat the increases every 5,5(5)4(4,5)3,5 cm 5(6)8(7)9 more times = 83(87)91(91)95 sts. Work the increased sts in double seed st.
When the piece measures 50(51)51(52)52 cm, on every other row bind off 1x5(6)6(7)7 sts, 0(1)1(1)1x4 sts, 2(1)1(1)1x3 sts, 2x2 sts, 12(12)13(13)14x1 st, 1x2 sts and 1x4 sts at both ends. Bind off the remaining sts.
Knit the other sleeve in the same manner, but instead of section B work section D of chart I.
Finishing
Pin to measurements wrong side up, mist and allow to dry. Sew the shoulder seams and side seams.
Border: Using the smaller needles pick up and knit sts from the RS of the work. Starting at the bottom edge of the right front pick up 3 sts for every 4 rows, place marker at the starting point of the neckline slanting, continue up to the shoulder seam, pick up 41(41)43(43)43 sts from the back neckline, continue to the starting point of the neckline slanting, place marker, continue along the left front edge. Make sure the number of sts is divisible by 2 + 1 st.
Begin ribbing: (WS) p2, k1, *p1, k1*, repeat *-*, p2.
After 2 rows in ribbing, begin short rows: (WS) work ribbing to last st before second marker. Turn work, yarn over. Work to last st before first marker. Turn work, yarn over. *Work to last 6 sts before next yo, turn work and yarn over*, repeat *-* until there are 9 yarn overs on both sides.
On the next row work ribbing to end. At the same time knit or purl the yarn overs together with the sts after them: k2tog if the next st is a knit st and p2tog if a purl st.
Work ribbing for 3 rows. On the first row work the remaining yarn overs together with the sts after them: skp if the next st is a knit st and ssp if it is a purl st (= slip 2 sts knitwise one by one from left-hand needle to right-hand needle, move both sts back to left-hand needle and purl them together through the back loop).
Repeat the short rows. After that, work ribbing, working the yarn overs together with the sts before them on the first two rows as established.
When the border measures 7 cm from the bottom, bind off in pattern.
Attach the sleeves. Sew the sleeve seams.
Finishing
Pin to measurements wrong side up, mist and allow to dry.
Belt: Using the smaller needles cast on 12 sts and work garter stitch for 160(160)170(170)170 cm. Bind off.
