Cable Wrist Warmers Novita Alpaca Wool
In these wrist warmers worked in Novita Alpaca Wool yarn meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables. Showy accessories include a hat as well.
Size(s)
woman
Yarn demand
Novita Alpaca Wool (off-white) 100 g
Needles and other supplies
Set of 5 double-pointed 4 mm needles
Designer
Irina Valtonen
Finished dimensions
''
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Right Wrist Warmer
Using double-pointed needles cast on 49 sts loosely. Distribute sts evenly over 4 of the 5 needles and, taking care not to twist cast-on edge and using 5th needle, work in rounds as follows:
Beg and ending rnds as indicated, work in rib and patt from chart as folls:
Rnd 1: work 17 sts in rib, P2, work cable A (=9 sts), P2, work 6 sts in moss st, P2, work cable B (=9 sts), P2. Rep rnds 1-8.
AT THE SAME TIME after 9 rnds have been completed cont 17 sts in pattern st instead of rib (=Rnd 2).
Work 1 rnd. Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P (make one stitch by picking up horizontal loop before next stitch and purling into back of it), P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Amount of sts is always 49.
Work until 2 purled sts are left in between cables.
Next rnd (rnd 4 or 8): work 21 in pattern st, P1, M1P,P1, K8, sl1, K1, psso, K2tog, K8, P1, M1P, P1, work 4 sts in pattern st.
Work 3 rnds.
Next rnd (rnd 4 or 8): work 21 in pattern st, P2tog, work cable A (=9 sts), M1P, work cable B (=9 sts),P2tog, work 4 sts in pattern st.
Next rnd (rnd 5 or 1): work 21 in pattern st, P1, work cable A (=9 sts), M1P, work cable B (=9 sts),P1, work 4 sts in pattern st.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables. When there is 6 sts in between cables, beg working them in moss st.
Work until there is 10 sts (=P2, 6 sts of moss st, P2) in between cables.
Work 11 rnds without increases and decreases.
Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P, P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Work until wrist warmer meas 24 cm. Cont working flat to form a thumb opening.
Thumb Opening
Turn at the end of rnd so that uneven rnd of chart is on the WS. Cont in patt as established including increases and decreases. Work flat 3,5 cm. Cont working in round.
Work until wrist warmer meas 28 cm and there is 10 sts (=P2, 6 sts of moss st, P2) in between cables. Cont 17 sts in rib st instead of pattern st. Work 10 rnds without increases and decreases. Cast off sts.
Left Wrist Warmer
Work as right wrist warmer. Make thumb opening on the other side of cables reversing shaping.
To Make Up
Lightly steam the wrist warmers.
Finished dimensions
''
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Right Wrist Warmer
Using double-pointed needles cast on 49 sts loosely. Distribute sts evenly over 4 of the 5 needles and, taking care not to twist cast-on edge and using 5th needle, work in rounds as follows:
Beg and ending rnds as indicated, work in rib and patt from chart as folls:
Rnd 1: work 17 sts in rib, P2, work cable A (=9 sts), P2, work 6 sts in moss st, P2, work cable B (=9 sts), P2. Rep rnds 1-8.
AT THE SAME TIME after 9 rnds have been completed cont 17 sts in pattern st instead of rib (=Rnd 2).
Work 1 rnd. Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P (make one stitch by picking up horizontal loop before next stitch and purling into back of it), P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Amount of sts is always 49.
Work until 2 purled sts are left in between cables.
Next rnd (rnd 4 or 8): work 21 in pattern st, P1, M1P,P1, K8, sl1, K1, psso, K2tog, K8, P1, M1P, P1, work 4 sts in pattern st.
Work 3 rnds.
Next rnd (rnd 4 or 8): work 21 in pattern st, P2tog, work cable A (=9 sts), M1P, work cable B (=9 sts),P2tog, work 4 sts in pattern st.
Next rnd (rnd 5 or 1): work 21 in pattern st, P1, work cable A (=9 sts), M1P, work cable B (=9 sts),P1, work 4 sts in pattern st.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables. When there is 6 sts in between cables, beg working them in moss st.
Work until there is 10 sts (=P2, 6 sts of moss st, P2) in between cables.
Work 11 rnds without increases and decreases.
Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P, P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Work until wrist warmer meas 24 cm. Cont working flat to form a thumb opening.
Thumb Opening
Turn at the end of rnd so that uneven rnd of chart is on the WS. Cont in patt as established including increases and decreases. Work flat 3,5 cm. Cont working in round.
Work until wrist warmer meas 28 cm and there is 10 sts (=P2, 6 sts of moss st, P2) in between cables. Cont 17 sts in rib st instead of pattern st. Work 10 rnds without increases and decreases. Cast off sts.
Left Wrist Warmer
Work as right wrist warmer. Make thumb opening on the other side of cables reversing shaping.
To Make Up
Lightly steam the wrist warmers.
Finished dimensions
''
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Stitch pattern
Rib in round: *K1,P1,rep from* to end.
Stocking stitch in round: knit all rows.
Pattern st in round:
Rnd 1-3: purl.
Rnd 4-6: knit. Rep rnds 1-6.
Moss stitch in round:
Rnd 1: *K1,P1, rep from * to end.
Rnd 2: *P1, K1, rep from * to end. Rep rnds 1-2.
Cable pattern: See chart.
Tension
20 sts and 20 rows to 10 cm measured over pattern st.
Note: Wrist warmers are worked in round except for the area of thumb opening which is worked flat. Meeting and separation of the cables is achieved by increasing and decreasing stitches in between cables.
Right Wrist Warmer
Using double-pointed needles cast on 49 sts loosely. Distribute sts evenly over 4 of the 5 needles and, taking care not to twist cast-on edge and using 5th needle, work in rounds as follows:
Beg and ending rnds as indicated, work in rib and patt from chart as folls:
Rnd 1: work 17 sts in rib, P2, work cable A (=9 sts), P2, work 6 sts in moss st, P2, work cable B (=9 sts), P2. Rep rnds 1-8.
AT THE SAME TIME after 9 rnds have been completed cont 17 sts in pattern st instead of rib (=Rnd 2).
Work 1 rnd. Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P (make one stitch by picking up horizontal loop before next stitch and purling into back of it), P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Amount of sts is always 49.
Work until 2 purled sts are left in between cables.
Next rnd (rnd 4 or 8): work 21 in pattern st, P1, M1P,P1, K8, sl1, K1, psso, K2tog, K8, P1, M1P, P1, work 4 sts in pattern st.
Work 3 rnds.
Next rnd (rnd 4 or 8): work 21 in pattern st, P2tog, work cable A (=9 sts), M1P, work cable B (=9 sts),P2tog, work 4 sts in pattern st.
Next rnd (rnd 5 or 1): work 21 in pattern st, P1, work cable A (=9 sts), M1P, work cable B (=9 sts),P1, work 4 sts in pattern st.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables. When there is 6 sts in between cables, beg working them in moss st.
Work until there is 10 sts (=P2, 6 sts of moss st, P2) in between cables.
Work 11 rnds without increases and decreases.
Beg increases and decreases in between cables as folls:
Rnd 4: work 17 sts in pattern st, P1, M1P, P1, work cable A (=9 sts), P2tog, work 6 sts in moss st, P2tog, work cable B (=9 sts), P1, M1P, P1.
Rep decreases and increases every 4th rnd that is on rnd 4 and rnd 8 of chart. Purl 2 sts at both sides of cables, increase sts into pattern st and decrease sts from moss st.
Work until wrist warmer meas 24 cm. Cont working flat to form a thumb opening.
Thumb Opening
Turn at the end of rnd so that uneven rnd of chart is on the WS. Cont in patt as established including increases and decreases. Work flat 3,5 cm. Cont working in round.
Work until wrist warmer meas 28 cm and there is 10 sts (=P2, 6 sts of moss st, P2) in between cables. Cont 17 sts in rib st instead of pattern st. Work 10 rnds without increases and decreases. Cast off sts.
Left Wrist Warmer
Work as right wrist warmer. Make thumb opening on the other side of cables reversing shaping.
To Make Up
Lightly steam the wrist warmers.
